Replacing your bathroom floor
Replacing ceramic floor can be done by the average homeowner qualified. You need a couple of special tools, but none of them is very expensive and the tools that will last forever. Be aware that the bathroom is down for a week or two and plan on that. If you are dong this alternative work part-time or evening or weekend to add a little more time. Remove all items loose in the bathroom. Next, remove the toilet. Land Cover pipe penetrations (shields) should be deleted. If the finish of the existing floor is ceramic on wood, hitting the tiles with a large hammer usually leave most of the tile. The rest can be removed with a chisel or a chisel and hammer masons. You should get a good sub-surface clean when finished. Wear goggles at all times.
Once the old tiles are removed, you must plan the design of new models of tile. Using real images, hair lay on the ground, not only to establish the model, but to see the cuts will be needed. It is important not to end up with a piece of tile from a wall and an almost full on the opposite side. You want as close as possible to have two equal parts on both sides of the room. Once you have the provision in which you want to ensure that the lines are parallel to a wall. The wall is on the right of the door liner is used, because that’s where you see the mosaic floor first. If the lines are straight, the rest of the monitoring room.
